When time is of the essence: Experience a top-class manicure experience with the Thuya Professional Nail Drill!
Working on your fingernails with a file can be exhausting in the long run. Instead of manual work, you can simply use the electric nail drill for filing. The nail cutter comes with 4 different attachments that can work on both nail modeling and natural nails.
The coarser attachments file off old modeling and shape artificial nails. Gel and acrylic layers can be roughened to give the manicure better adhesion and therefore a longer hold. Artificial nails are polished to a high gloss with the particularly fine cutter attachments. They can also be used to gently work on natural nails. For example, you can remove annoying cuticles quickly and effectively or create your desired nail shape.
The nail cutter is equipped with a long cable, allowing you to choose where you want to work. You can also select various settings here, such as the speed or direction of rotation. The actual cutter with which you work on the nail is connected to the main device.
The nail cutter can rotate at a speed of up to 25,000 rpm (revolutions per minute) and files your nails extremely efficiently. Try this new way of filing and order the electric nail cutter today!
Cleaning: Use a soft cloth slightly moistened with water to clean the device. Dust off the handpiece with a soft brush. Ensure that the handpiece does not come into contact with moisture. Spray disinfection is unsuitable.
Further accessories for professional manicures as well as nail polish and care products from the Thuya brand can be found in our online store.
Instructions for use:
- Preparation:
Ensure that the device is properly connected and ready for use.
- Tool selection:
Depending on the desired application, select the appropriate milling attachment or drill bit. This may vary depending on the model.
- Settings:
Check the settings of the device, especially the rotation speed. Adjust the speed according to your needs.
- Nail care:
Start carefully with nail care. The device can be used to shorten the nail length, shape the nail form or smooth the nail surface.
- Safety:
Take care not to press the device too hard on the nail to avoid injury. Work in short, controlled steps.
- Switch off:
Switch off the device when nail care is complete.
Instructions for cleaning and care:
- Switching off and disconnecting:
Switch the device off and disconnect it from the power supply.
- Cleaning the milling attachments:
Remove the milling attachments and clean them thoroughly. This can be done by wiping or soaking in disinfectant.
- Cleaning the device:
Use a soft cloth or cotton swab to remove residue from the device. Avoid moisture entering the inside of the device.
- Maintenance:
Regularly check the integrity of the milling attachments and the device. Replace worn or damaged parts in good time.
- Storage:
Store the device in a dry and safe place to prevent damage.
It is important to follow the manufacturer's specific instructions in the user manual to ensure safe and effective use of the electric nail cutter.